\n \n

Browser tool · production programming

Firmware programmer.

Operate the StiknTrak production programmer from this page. Firmware remains on this Mac and is passed only to the local programming bridge.

Connect the programming bridge

Checking local bridge…First-time automatic setup ↓
  1. For the first use only, download and unzip the bridge setup.
  2. Right-click Install_Automatic_StiknTrak_Bridge.command, select Open and choose your .jflash project.
  3. The bridge then starts automatically whenever you log into this Mac.

The browser cannot access a J-Link probe by itself. The bridge is the secure local connection to SEGGER J-Flash.

Firmware devices

J-Flash project: waiting for bridge

Select the folder containing provisioned .hex firmwareNothing is uploaded to StiknTrak. Files are read locally by your browser.
0 firmware files 0 flashed
LAST FILE FLASHEDNone in this programming history
Saved locally on this Mac for the selected batch.
STATUS: WAITING FOR FIRMWARE

Programming log

Start the local bridge, select the firmware folder and choose a device identity.